MJL-375-ZY

Product overview

Application: adjustable yoke ends (also called "clevis ends") are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point. This particular yoke design is called an adjustable offset yoke since the threaded barrel is located to one side of the jaws as opposed to running into the jaws. This design is frequently used on fire truck pump house linkages. Construction: forged or cast, low carbon steel. Dimensions are per SAE J493, tolerances are per our standard. Finish/Plating Code: the suffix of the part number indicates the plating color (i.e., 280377 would be zinc yellow). Codes: 77 = zinc yellow 80 = zinc clear Specials: almost any type of pin hole or thread can be put into a yoke end at a very reasonable cost. Modifications to the actual housing dimensions require large volumes to remain economical.