BTC-250S
Clevis and Yoke Ends · Female
Female 1/4-28 RH 0.250 Pin Holes 1/4 Short Body Zinc Yellow Plating Turned Construction
| Part number | BTC-250S |
| Category | Clevis and Yoke Ends |
| Type | Female |
| Threads | 1/4-28 RH |
| A | 0.972 |
| B | 0.394 |
| D | 0.472 |
| E | 0.2500 |
| F | 0.500 |
| G | 0.2500 |
| H | 1.220 |
| I | 0.500 |
Product overview
Application: inch clevis ends are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point.
Attaching Hardware: Inch clevis spring pins, cotter pins, safety clips, etc. are available in volume.
Construction: Similar to DIN 71752.
Finish: plated zinc with a yellow dichromate treatment.
Material: low carbon steel.
Turnbuckle Option: consider using MCP's exclusive turnbuckle clevis to eliminate the need for left hand threads and to allow adjustment of linkage lengths after installation.
Cost Savings Tip: cost effective designs should always include the entire rod-nut-yoke assembly, as opposed to purchasing these components separately. Specify the use of clevis spring pins to reduce assembly costs.
More in Clevis and Yoke Ends
